The self-powered VA15Si and externally amplified VAX15Si are ideal companions to VARIA101i array modules. The high-power 15-inch woofer delivers outstanding low-frequency impact in a design that maximizes the efficiency of this cutting edge woofer technology.
Low-frequency output extends down below 40 Hz and delivers a peak SPL output of up to 129 dB, providing a solid foundation for any musical performance.
VA/VX15S subwoofers can be ground stacked and used as a sturdy base for one or more VARIA array modules. They can also be flown as separate low frequency arrays, or flown at the top of full-range VARIA arrays, keeping the entire system off the floor.
Together, VARIA array modules and VARIA subwoofers provide a high-power, full-range system capable of handling the most demanding musical performances, especially in difficult acoustical environments.
Technical Information |
||
| Sensitivity: | VX15S | 95dB (1W/1m) |
| VA15S- RN VA15S-RD |
1.4 V for RPO | |
| Freq. Response: | VX15S VA15S-RN VA15S-RD |
40 Hz to 120 Hz (+/- 3dB) |
| Max SPL: | VX15S | 131dB peak @ 1 meter |
| VA15S-RN VA15S-RD |
126 dB peak @ 1 meter | |
| Power Rating: | VX15S | 1000W AES, 2000 W PGM @ 8 ohms |
| VA15S-RN VA15S-RD |
See SA1250 Internal Power Amplifier specifications | |
| Connectors: | VX15S | 2x NL4 Speakon (looping) LF 1+/1- HF 2+/2-, Barrier Strip |
| VA15S-RN VA15S-RD |
See SA2000 Internal Power Amplifier specifications | |
| Hardware: | VX15S VA15S-RN VA15S-RD |
8-point universal mounting hardware (Metric M10 threads) Integral Flying Hardware |
| Option: | VX15S VA15S-RN VA15S-RD |
Heavy Duty Casters |
| VX15S VA15S-RN VA15S-RD |
Weather Resistant Treatment | |
| Enclosure: | VX15S VA15S-RN VA15S-RD |
3/4″ (19 mm) Lite Ply® plywood. Perforated metal grille |
| Finish: | VX15S VA15S-RN VA15S-RD |
Black or White Paint as Standard Custom Color Paint available as cost option |
| Dimensions: | VX15S VA15S-RN VA15S-RD |
W 24″ x H 19″ x D 22 1/2″ (618 mm x 482 mm x 571 mm) |
| Weight: | VX15S VA15S-RN VA15S-RD |
120 Lbs (54.4 kg) Net without MPS rigging connector 126.4 Lbs (57.3 kg) Net with MPS rigging connector |
SA1250 Amplifier Specifications |
||
| Audio Connections: | VA15S-RN | 2 x XLR-3, In & Loop-out, Analog and AES |
| VA15S-RD | 2 x XLR-3, In & Loop-out, Analog and AES 2 x RJ45 Dante Primary & Secondary Ethernet |
|
| Network : | VA15S-RN | 2 x RJ45, Looping Ethernet/RHAON |
| VA15S-RD | 2 x RJ45 Dante Primary & Secondary Ethernet/RHAON (Note: Dante and RHAON share a single or redundant Ethernet network.) | |
| Max Input Level: | VA15S-RN VA15S-RD |
+22 dBu, Analog, 0 dBFS digital |
| User DSP: | VA15S-RN VA15S-RD |
Eight fully parametric filters, high and low shelf, high and low pass filters, delay to 340 ms. |
| Software: | VA15S-RN VA15S-RD |
RHAON II |
| Latency: | VA15S-RN | 6.25 ms |
| VA15S-RD | 6.25 ms Analog & AES 6.25 ms + Dante transport latency |
|
| Power Output: | VA15S-RN VA15S-RD |
1000 watts, @ 8 ohms. Multi-band peak and thermal limiting on all channels protects the drivers. |
| Mains Voltage: | VA15S-RN VA15S-RD |
100-240 volts, 50/60 Hz auto-switching |
| Power Consumption: | VA15S-RN VA15S-RD |
Idle: 300 mW. 1/8 power: 240 W (onset of limiting) 1/3 power: 550 W (hard limiting) |
| Power Connector: | VA15S-RN VA15S-RD |
Neutrik powerCON TRUE-1 |
| Temperature Limits: | VA15S-RN VA15S-RD |
Max.: 140º F/60º C, with no direct sun exposure; Min.: -22º F/-30º C; leave unit on to keep interior warm below 32º F/0º C. |