P3-15

The P3-15 offers the sonic and performance advantages of a three-way loudspeaker in a cabinet the size of most two-ways. The CoEntrant CDT3 mid-high driver allows the use of a single, optimally sized Complex Conic horn. Not only does this insure consistent directivity through crossover, but also allows the horn to be ideally sized for consistent directivity through the low-mid crossover as well. Only Renkus-Heinz can combine this level of performance, fidelity and power in such a compact, easy to install or transport, loudspeaker.

DOWNLOADS

PRODUCTS IN THE SERIES

Specification

Technical Data
Frequency Response:	P3-15-RN P3-15-RD	65 Hz. to 20 kHz. (-3 dB) 50 Hz to 20 kHz (-10 dB)
Sensitivity:	P3-15-RN P3-15-RD	1.4 volt for rated output, analog
Maximum Peak SPL:	P3-15-RN P3-15-RD	128 dB-SPL (Peak, whole-space)
Dispersion:	P3-15-RN P3-15-RD	60 h x 40 v (Optional 90 h x 40 v)
Crossover Frequency:	P3-15-RN P3-15-RD	480 Hz & 2.5 kHz active electronic
Enclosure:	P3-15-RN P3-15-RD	3/4 in./19 mm Lite Ply plywood
Grille:	P3-15-RN P3-15-RD	16 GA powder coated, plated steel
Finish:	P3-15-RN P3-15-RD	Black (RAL9010) or White (RAL9011) paint, standard. Custom colors optional.
Weight:	P3-15-RN P3-15-RD	69 lbs/31.2 kg
Dimensions:	P3-15-RN P3-15-RD	7-1/2″ w x 28-1/2″ h x 18-7/8″ d 445 mm w x 724 mm h x 479 mm d
SA2000 Amplifier Specifications
Audio Connections:	P3-15-RN	2 x XLR-3, In & Loop-out, Analog and AES
	P3-15-RD	2 x XLR-3, In & Loop-out, Analog and AES 2 x RJ45 Dante Primary & Secondary Etherne
Network Connections:	P3-15-RN	2 x RJ45, Looping Ethernet/RHAON
	P3-15-RD	2 x RJ45 Dante Primary & Secondary Ethernet/RHAON (Note: Dante and RHAON share a single or redundant Ethernet network.)
Max Input Level:	P3-15-RN P3-15-RD	+22 dBu, Analog, 0 dBFS digital
User DSP:	P3-15-RN P3-15-RD	Eight fully parametric filters, high and low shelf, high and low pass filters, delay to 340 ms.
Software:	P3-15-RN P3-15-RD	RHAON II
Latency:	P3-15-RN	6.25 ms
	P3-15-RD	6.25 ms Analog & AES 6.25 ms + Dante transport latency
Power Output:	P3-15-RN P3-15-RD	LF= 1000 watts, @ 8 ohms / MF = 500 watts @ 4 ohms, HF = 250 watts @ 8 ohms. Multi-band peak and thermal limiting on all channels protects the drivers.
Mains Voltage:	P3-15-RN P3-15-RD	100-240 volts, 50/60 Hz auto-switching
Power Consumption:	P3-15-RN P3-15-RD	Idle: 400 mW. 1/8 power: 480 W (onset of limiting) 1/3 power: 1100 W (hard limiting)
Power Connector:	P3-15-RN P3-15-RD	Neutrik powerCON TRUE-1
Temperature Limits:	P3-15-RN P3-15-RD	Max.: 140º F/60º C, with no direct sun exposure; Min.: -22º F/-30º C; leave unit on to keep interior warm below 32º F/0º C.

P3-15

P3-15

DOWNLOADS

PRODUCTS IN THE SERIES

Technical Data

SA2000 Amplifier Specifications