Renkus-Heinz Inc. - Professional Audio Systems

On-Line

Customize/Place order

Order/Account Status

Home

Products

Amplifiers

PM Series

THE PM2 POWERNET INTELLIGENT AMPLIFIER

High Output Two Channel Amplified Power

600 Watt Peak (425 Watt RMS) Mid Band Amplifier projects the vocal range cleanly.

250 Watt Peak (175 Watt RMS) Hi Band Amplifier for clear smooth transients.

Audiophile Performance

< 0.01% distortion typical.

< -100 dB noise, 20Hz to 20kHz.

> 90 dB CMRR.

Flat response from 20Hz to 20kHz.

Advanced Class D Digital Technology

Smaller, lighter, cooler.

High efficiency reduces AC power requirements, eliminates the need for fan cooling.

Flexible Audio & Control Network Technologies

High CMRR Analog Input, or

CobraNet® 64 channel digital audio
network (1 digital input, 6 individual
analog outputs)

R-Control Echelon LonWorks® Remote Control & Supervision

Controls: Volume, Polarity, Mute, etc.

Monitors: Signal Levels, Temperature, Impedance, etc.

v Manages Scene Store/Recall, Event Scheduling, Fault Logger.

Speaker Specific Signal Processing

Provides Crossover, Equalization, Thermal Protection, Peak Limiting, Excursion Control, Alignment Delays.

Analog Input Module		CobraNet® Digital Audio Network Input Module
	• Looping XLR input connectors • Optional Jensen Input Transformer • 1 dB stepped volume control • Hi, Mid & Lo band mutes • LED status indicators		• 64 audio channels over CAT 5 cable • 1 input (digital) • 6 outputs (analog)

Analog With R-Control		CobraNet With R-Control
	• All Analog Input features Plus • R-Control Remote Control and Supervision		• All CobraNet Digital Audio Network Input features Plus • R-Control Remote Control and Supervision

TECHNICAL SPECIFICATIONS

POWER RATINGS: (Watts)
Mids:	425 RMS, 475 Pgm, 600 Peak (20 ms)
Highs:	175 RMS, 200 Pgm, 250 Peak (20 ms)
FREQUENCY RESPONSE:	+0.0,-.5 db, 20Hz to 20kH
THD DISTORSION:	<0,01% typical
HUM & NOISE:	<100 dB (refered to RPO@4Ohms)
INPUT SENSITIVITY:	1,4V for RPO
DAMPING FACTOR:	100 (400Hz to 2kHz)
	100 (2kHz and up)
POWER CONNECTOR:	PowerCon locking connector
POWER REQUIREMENTS:	90-136 VAC or 180-260 VAC, 50/60Hz
	6.5Amps@120V, 2.2Amps@240V
Idle Current:	380mA@120V, 190mA@240V

ANALOG INPUT (STANDARD)	50K Ohm balanced differential input
Connectors:	Input; female XLR, Looping; male XLR
	(pin 1 chassis, pin 2+, pin 3 signal)
Common Mode Rejection:	>90dB, 30Hz to 2kHz
Controls:	Rotary Gain, LF, MF, HF Mute Buttons
Options:	Optional Jensen input transformer
COBRANET INPUT:	CobraNet input on two RJ45 connectors for redundancy
Channels:	6 analog (1 dedicated to loudspeakers) selectable
	from 4 CobraNet bundles (32 Channels)
R-CONTROL CARD:	Input: RJ4 connector
Gain Control:	Rocker switch on panel + computer control
Mute Buttons:	Independent LF, MF, HF Mute Buttons on panel +
	computer control
Computer Control & Monitoring:	Computer Supervision & Control of:
	Gain, Polarity, Mute, Input-Output VU Meters,
	Heatsink Temperature, Groups, Scenes, Error Logs,
	Alarms

end of page

go to top